Series 24/26
The smallest 1-Axis-Position Indicator
for length and
angular measurement
Essential features
The Position Indicator
is available in 3 different versions: |
 |
| 1. Serie Z-24E: |
for incremental
encoders |
| 2. Serie Z-26E: |
for magnetic sensor (resolution
1/100 mm) |
| 3. Serie A-24E : |
with serial interface RS 422 for
absolute magnetic measuring system
MAX |
Features:
- incremental and absolute measurement
- Datum
offset
- Pulse multiplication
- encoder edge detection
-
display brightness
Technical
data: |
| Power supply: |
15 to 30 V DC, 115 V / 230 V AC
with external PSU NG 20 |
| Input signal: |
open collector, PNP |
| Connections: |
plug-in connector |
| Display: |
6 decades, 8 mm high
(LED) |
| Counting frequency : |
64 KHz (Z-24E) |
| Dimensions: |
width x height x depth = 72 x 48 x
58 mm |
| Cut out: |
69 x 45 mm |
| Ambient temperature: |
0....+50°
C |
Series 54/56
1-Axis-Position Indicator
for all ELGO Measuring
Systems
The position indicators are available in 3 different
versions: |
 |
| 1. Serie 54: |
for incremental encoders and Elgo
measuring system MIX (external translator, resolution 0,01 mm)
|
| 2. Serie 56: |
for magnetic sensor (translator
integrated, resolution 0,1 mm) |
| 3. Serie A-54E: |
with serial interface RS 422 for
Elgo absolute magnetic measuring system MAX
|
Features:
- absolute and incremental measuring
- tool
offset compensation
- pulse mulitplication
- inch/metric
switching
- encoder edge detection
- memory on power down
-
decimal places
Technical data:
|
| Power supply |
24 V DC or 230 V / 115 V
AC |
| Input signal |
open collector,
PNP |
| Connections: |
plug-in
connector |
| Display: |
LED 7 segment, 14 mm high
(5 decades)
10 mm high (6 decades) |
| Counting
frequency: |
10 KHz or 64 KHz
|
| Enclosure: |
black metal for panel or
enclosure mounting |
| Dimensions: |
1. panel mounting: 96 w x
72 h x 62 d mm
2. enclosure mounting: 107 w x 76 h x 90 d mm
|
| Cut out: |
92 w x 66 h mm |
| Ambient temperature:
|
0 to +50° C
|
Series Z- 59E
The smallest 3-Axis-Position Indicator
for length and
angular measurement
Features: |
 |
Designed to operate from
encoder or magnetic scale feedback
Extensive software options for each axis:
-Input of required datum value by means of the front
buttons
-Absolute and incremental measurment
-Setting of
multiplication factor for display
-Inch/metric
selection
-Encoder edge multiplier
Inputs for datum, offset and reset to zero
Memory on power down
Robust foil covered buttons
Technical Data:
|
| Power Supply: |
+24 V DC |
| Encoder Supply: |
+ 24 V DC / 130 mA (depends on
external power supply unit) |
| Input Signals: |
PNP (positive logic) |
| Actual Position Memory: |
by Li-battery, life: 10
years |
| Connections: |
Phoenix-connector |
| Display: |
LED 7 segment red 10 mm
high |
| Hardware: |
16 bit-Microprocessor with 32
Kbyte E-Prom and 2 Kbyte RAM |
| System accuracy: |
+/- 1 increment |
| Counting frequency: |
20 KHz (higher on
request) |
| Enclosure: |
Black metal, for fitting into
control panel |
| Depth: |
72 mm |
| Cut out |
92 x 66 mm |
| Ambient temperature |
0° to +50°
C |
|
