a63.JPG (4220 bytes)
  • American standard incremental shaft encoder for industrial use.
  • Any number of pulses per turn available from 1 to 5000 pulses.
  • Diameter 63,5mm. (2.5").
  • Shaft 9,52 mm (3/8") or 10mm
  • Protection class IP65 attending DIN 40050.
  • Flexible due to many flange and configuration variants.
  • Connection by cable (any cable length available) or industrial connector.











Body Aluminium
Shaft Stainless Steel
Bearings Ballraces
Bearings life 1x 1010 rev
Absolute maximum speed 6,000 rpm
Protection class attending DIN 40050

IP55 without shaft seal
IP65 with shaft seal

Moment of inertia 30 gcm2
Torque 20ºC (68ºF)

0,5 Ncm.without shaft seal
2,0 Ncm. with shaft seal

Absolut maximum axial shaft load 40 N
Absolut maximum radial shaft load 60 N
Weight 0,5 Kg
Operating temperature -20ºC +60ºC
Storage temperature -20ºC +70ºC
Vibration proof 100m/s2
Shock resistance 300m/s2 (6ms)
Atmospheric humidity 98% without condensation
Test before deliver 48 hours
Maximum increments per turn Up to 5000 pulses per turn
Connection, axial or radial 2 metres cable or industrial connector
(Other cable length on request)

 









s63.GIF (18195 bytes)






Serie Shaft Flange Output signals Connection Electrical output Number of pulses
63
1- 9,52 x 23,00mm (3/8" x 0,095")
2- 10 x 23mm		 1- Withut range
2- 90.1005
3- 90.1006		 1-
2- 		1- Axial cable
2- 90.9510 axial		 1- Push-Pull 11-30-Vdc
2- TTL 5 Vdc
4- 15-30 Vdc OUT 12 Vdc
6- NPN 11-30 Vdc
7- Standard RS-422.5 Vdc