ATL 80
Dynamic load up to 80.000 N
Acme screw linear actuator with high efficiency worm gear. Bronze worm wheel and bronze acme nut for high reliability and longer life time. Push or pull load. Gear housing in sferoidal cast iron alloy. Steel protective tube; push rod in hard crome plated steel tube. Lifelong grease lubricant, grease nipples lubricators for maintenance. Minimum axial backlash. Performing noiseless and running with high accuracy. Painting blue color RAL 5010.
-------------------------------------------------------------------
Max load [N] 80.000
Max linear speed [mm/sec] 115
Standard strokes lenghts [mm] 100, 200, 300, 400, 500, 600, 700, 800
-------------------------------------------------------------------
Main features :
Rod diameter [mm] 90
Protective tube diameter [mm] 115
Motor flange European standard IEC 80 B5 o 90 B5
Max static load - pull [N] 80.000
Max static load - push [N] 100.000
Actuator weight stroke 100 mm without motor [kg] 95
Additional weight each 100 mm 5,5
Duty cycle 30% over 10 min at 25°C room temperature.
3 worm gear ratios available.
8 different linear speeds available.
Acme screw 1 or 2 starts.
Lifelong grease lubricant for environmental temperature from -15 °C to +40 °C.
On request:
special execution for lower or higher environmental temperatures;
customized stroke lengths lower or higher than standard strokes;
push rod in stainless steel;
motor mounting position on the opposite side (left hand).
-------------------------------------------------------------------
Input versions :
Standard motor flange IEC 80 B5 or IEC 90 B5;
motor flange and extended input shaft;
single input shaft;
double input shaft;
motor adapter + coupling IEC 100 B5, IEC 112 B5, IEC 100 B14 or IEC 112 B14.
-------------------------------------------------------------------
Electric motors :
AC 3-phases 230 / 400 V 50 Hz IP 55 F, 2 or 4 poles, with ventilation system;
AC motor 1-phase 230 V 50 Hz IP 55 F, 2 or 4 poles with ventilation system;
AC motors available with or without brake.
AC motors in multivoltage executions, can operate also at 60 Hz.
On request: special voltages, special wiring protections and insulations.
Acme screw actuators are statically self-locking. Brake motor is recommended for stopping accuracy.
-------------------------------------------------------------------
Accessories :
Electrical stroke end switches.
Proximity stroke ned switches.
Front attachments: hinged head, ball joint, flange end.
Rear fixing bracket.
Encoder EH53 incremental bidiretional, 100 or 500 pulses per 1 motor turn.
-------------------------------------------------------------------
|
