Light Source Internal Shutter
This optional internal shutter offers many benefits. Located inside a light source, this shutter requires no additional external space. In addition, it is not connected to light intensity functions allowing it to operate independently. Capable of opening and closing some 50 million times over the course of its long life, this shutter is operated by applying voltage.

 

SPECIFICATIONS
Input Voltage: DC24V 0.32A

Shutter Speed data:

Normal Close Type:
25mS for opening
30mS for closing 		Normal Open Type:
25mS for opening
30mS for closing
Please note:The speed of the shutter will depend on the performance of the power source. Also, light sources which use the normal open type shutter will have an “-SO” added to their product number, while those using a normal close type shutter will have “-SC” as a suffix. Thus, an MHF-D100LR which uses a normal open type shutter is called MHF-D100LR-SO. Not compatible with the MHF-G150LR.
Large Diameter Ferrule
MHF-PC003
For use with large diameter male ferrules. Can be used with the MHF-D100SLR and the MHF-G150LR. Special instructions are required for use with the MHF-G150LR. Please contact your Moritex sales representative for further information.

MSH-3T10
The MSH-3T10 is a triple filter system that attaches to the front of any standard Moritex light source. Using three separate ON/OFF solenoids, you can switch quickly from one type of filter to another. The system’s default is “normal open.” Recommended filters are 15mm Ø and 2.5mm thick. Moritex’s KA-03 is required when using the MSH-310 with the MHF-G150LR light source.

 

| Remote Control Light Sources | Special Application Light Sources |

| Light Sources | Light Guides |

| Machine Micro Lenses [MMLs] | Illumination Systems |