Two phase stepper motors with NEMA34 standard flange
Six different torque values from 3Nm up to over 12Nm with NEMA34 standard flange. All the motors are provided with 8 leads and can be therefore used also with unipolar drives. When used in bipolar mode (recommended) it is possible to choose between a series connection, to limit the phase current, or parallel connection, for applications where the motor runs at high speed.
The motor shaft of 14mm diameter ensures stability also in application with belt transmission and high working tension. On request the motor can be realized with 12mm shaft with key, with double shaft, etc.
Model |
Holding Torque
(Nm) |
Bipolar Parallel Current (A) |
Length
(mm) |
M1343011 |
3.1 |
5.6 |
63 |
| M1343020 |
4.4 |
5.6 |
78 |
| M1343021 |
4.4 |
7.1 |
78 |
| M1343031 |
6.8 |
7.1 |
98 |
| M1343041 |
8.1 |
7.1 |
114 |
| M1343050 |
9.2 |
7.1 |
126 |
| M1343051 |
9.2 |
10.0 |
126 |
| M1343061 |
12.1 |
12.0 |
150 |
