| |
| |
1,2Apk 42Vdc serially controllable bipolar driver |
 |
- Maximum power supply voltage 42Vdc
- Phase current 1,2A
- Integrated indexer serially controlled
- Resolution selection between full and half step mode
- Automatic resolution selection according to speed
- Possibility to control up to 32 drivers through one only serial line
- Possibility of mixed connections to USD50xxx or USD60xxx drivers
- Motion parameters can be changed for each movement
- Commands for absolute or relative movement
- Commands for constant speed movement
- Driver status and motor position reading also while in movement
- I/O settable as inputs or outputs
- Logic signal TTl/CMOS compatible
- Chopper frequency over 20KHz
- Automatic current reduction
- ENABLE input to turn off the power stage
- Txon output for a simple RS485 communication implementation
- Internal pull-up resistors on each input
- Phase-to-phase short circuit protection
- Phase-to-ground short circuit protection
- Phase-to-positive short circuit protection
- Over voltage protection
- Under voltage protection
- Compact size
|
| |
|
|
|
