Servo vision CO.,LTD

2,4Apk 42Vdc serially controllable bipolar driver

• Maximum power supply voltage 42Vdc
• Phase current 2.4A
• Integrated indexer serially controlled
• Resolution selection between full and half step mode
• Automatic resolution selection according to speed
• Possibility to control up to 32 drivers through one only serial line
• Possibility of mixed connections to USD50xxx or USD60xxx drivers
• Motion parameters can be changed for each movement
• Commands for absolute or relative movement
• Commands for constant speed movement
• Driver status and motor position reading also while in movement
• I/O settable as inputs or outputs
• Logic signal TTl/CMOS compatible
• Chopper frequency over 20KHz
• Automatic current reduction
• ENABLE input to turn off the power stage
• Txon output for a simple RS485 communication implementation
• Internal pull-up resistors on each input
• Phase-to-phase short circuit protection
• Phase-to-ground short circuit protection
• Phase-to-positive short circuit protection
• Over voltage protection
• Under voltage protection
• Compact size