Compact
- Small size motor is ideal for compact machine designs
- High flux density neodymium iron boron permanent magnets reduce rotor size
- 5 frame sizes with flange widths from 1.57 to 3.35 inches (40 to 85 mm)
High Performance
- High torque-to-inertia ratio permits fast acceleration and deceleration reducing positioning time
- Advanced magnetic circuitry and optimum winding geometry deliver very low cogging torque
- Peak torque up to three times continuous torque
- Peak torque can be maintained for up to three seconds
- Rated speed of 3,000 rpm, max speed of 5,000 rpm
High-Resolution Serial Encoder
- 8,192 ppr incremental encoder standard 1
- 65,536 ppr absolute encoder optional 1
- Amplifier automatically recognizes the motor and optimizes parameters
- Error checking eliminates lost motion from electrical noise
Options
- NEMA 23 and 34 Flange 2
- Shaft Seal
- Holding Brake
- Absolute Encoder
- Shaft with or without keyway
Application Emphasis
- Compact Machine Designs
- High Cycle-rate Applications
- Chip Mounters
- PCB Drilling Machines
- Robots
- Smart Conveyors
- Labeling Machines
- Shrink Wrapping Machines
Enclosure
- Totally enclosed, self cooled IP55 (except for shaft opening)
Certified International Standards
- UL, cUL recognized (File #: E165827), CE compliance
1 ppr is pulses or counts per revolution (post quadrature) or maximum resolution.
2 NEMA 23 and NEMA 34 flange motors have shaft diameters larger than typical NEMA dimensions due to servo application torques. |