Compact
- The length is about ½ of similar rated motors
- Up to 126 lb-in (14.3 Nm) of torque from motors less than 5 inches long
- High flux density neodymium iron boron permanent magnets reduce rotor size
- 3 frame sizes with flange widths from 2.36 to 4.72 inches (60 to 120 mm)
High Performance
- Enhanced radial shaft load due to upgraded bearing size
- Advanced magnetic circuitry and optimum winding geometry deliver very low cogging torque
- Peak torque up to three times continuous torque
- Peak torque can be maintained for up to three seconds
- Rated speed of 3,000 rpm, max speed of 5,000 rpm
High-Resolution Serial Encoder
- 8,192 ppr incremental encoder standard 1
- 65,536 ppr absolute encoder optional 1
- Amplifier automatically recognizes the motor and optimizes parameters
- Error checking eliminates lost motion from electrical noise
Options
- Shaft Seal
- Holding Brake
- Absolute Encoder
- Gearmotor
Application Emphasis
- Compact Machine Designs
- PCB Drilling Machines
- Metal Forming
- Form-Fill-Seal Machines
- Case Packers
- Cartoners
- Sorting/Diverting Machines
- Robots
- Smart Conveyors
Enclosure
- Totally enclosed, self cooled IP67 (except for shaft opening)
Certified International Standards
- UL, cUL recognized (File #: E165827), CE compliance
1 ppr is the resolution in pulses per revolution as seen by the controller (post quadrature). |