MAGNETIC LINEAR ENCODER SCALES  

MLS 1 • Non Contacting  Incremental System • Very small measuring head ( metal enclosure) • Wide range of available resolution up to 1 µm • Protection class IP67 • Measuring lenghts  are up to 100 meter • Resistant to humidity • Wide mounting tolerances • Robust shielded aluminium • Incremental outputs A, /A, B, /B and Z Reference signal (without or one reset signal by start, or every 5 mm)  • Output signal Push-pull, TTL or RS422 line driver

	MLS 2 MLS1 and PS2 Profile System • Tape in flat aluminium profile • Wide range of available resolution up to 1 µm • Protection class IP67 • Measuring lenghts  are up to 100 meter

MLS4 New Version

Self-Aligned System
MLS4  is designed for press brake and bending machine applications.
 
• Double protection along the sliding side (four lip seals)
• Self aligned
• With integrated guide
• Large mounting tolerances
• Self-adjustment of the clearance between the guide and the carriage.
• Shielded and armoured power cable with a stainlesssteel braid.
• Functional-calibration hybrid circuit.
• Excellent stability of the signals
• Positive or negative signals via Line-Driver outputs
• Compressed air inlet inlets at the scale end blocks

LTS

• Stroke up to 750 mm
• Magnetic Linear Encoder System
• PUSH PULL or TTL RS 422 Line Driver Output
• A , B signals
• Wide range of available resolution up to 5 µm
• Twin-bearing actuating rod
• Free pivot heads with a large angle of free movement
• Very long life
• Protection Class IP 65
• High operating speed 5 m/s